Cloud phones with real local technicians — Phoenix metro only📞 (480) 397-2627
Home › Help & Guides › Fiber vs. copper in the office
Cabling and network

Fiber vs. Copper: What an Office Actually Needs

Copper still runs to the desk. Fiber is for backbones, buildings and distances copper cannot do well. Most offices need both.

Most office jacks are still copper for a good reason: desks, phones, cameras and access points expect an RJ45 connection, and Power over Ethernet only travels on copper. Fiber belongs where copper is the wrong tool — a long backbone, a run between buildings, electrical isolation, or a speed copper cannot reach at that distance.

When copper is the right choice

  • Horizontal cabling from the closet to desks, printers, phones, cameras and Wi-Fi access points
  • Short server-room links, including Cat8 when you need 25 or 40 Gb up to 30 m
  • Any device that needs PoE
  • Existing Cat5e or Cat6 that tests good and still meets the need

When fiber is the right choice

  • Between floors or closets as a backbone, especially when the copper distance or future speed would be a problem
  • Between buildings on a campus or across a parking lot, where distance, lightning and electrical isolation matter
  • Electrically noisy spaces or any path where you want the link isolated from building power
  • Higher-speed uplinks from an access switch to a core, or into a carrier or data-center handoff

Multimode vs. single-mode, briefly

Multimode (commonly OM3 or OM4) is typical for shorter indoor backbones and many equipment-room links. Single-mode (OS2) is the usual choice for longer distances, campus or building-to-building runs, and for a backbone you do not want to outgrow. The transceivers and connectors have to match the fiber. We will specify the type from the distance, the equipment you have (or plan to buy), and the path, not from a generic “fiber is faster” rule.

Most offices use both

A common, durable design is fiber between closets or buildings, and copper from the closet to the work area. That is also how we plan structured cabling for data centers, new build-outs and existing offices. If a closet is already a tangle, a rack cleanup is often the first step so the new fiber or copper has a clean place to land.

C13 installs single-mode (OS2) and multimode (OM3/OM4) fiber, terminates it in rack-mount enclosures, and tests the links. Call (480) 397-2627 or get a cabling estimate.
Not sure, or short on time? Call C13 at (480) 397-2627 or email us at [email protected], and we'll walk you through it or make the change remotely.

Questions we hear a lot

Can fiber power a phone or a camera?

No. PoE travels on copper. A fiber run to a remote building usually ends in a small switch that then feeds copper and PoE to the devices.

Is fiber always faster than copper?

Not at every distance. Cat6A already does 10 Gb to 100 m, and Cat8 does 25/40 Gb to 30 m. Fiber is chosen for distance, isolation, backbone speed and future headroom, not because copper is obsolete.

Do we have to rewire the whole office to add fiber?

Usually no. Fiber can be added as a backbone between closets or buildings while existing copper stays in place at the desks.

Related guides

Related services: Structured cabling · Fiber optic cabling · Service areas

Need a hand from a local technician?

C13 serves Phoenix-metro businesses only, so when a phone call or remote change won't fix it, a C13 technician can come to your office. Commercial clients only.

Requests sent outside business hours (Monday–Friday, 8:00 AM–5:00 PM Arizona time, closed on holidays) are handled as after-hours work and billed at 1.5x our standard hourly rate; holidays and emergencies are billed at 2x. We respond within 2 to 4 hours after your email is read. For an emergency, email [email protected] with EMERGENCY in the subject line, or call (480) 397-2627.

Last reviewed November 2026. Product names and trademarks belong to their respective owners; C13 is an independent service provider.

📞 CallInstant QuoteLogin